How to Set Up WAVLINK Router to AP (Access Point) Mode? (Step-by-Step Guide)

If you’re looking to extend your existing network without creating a separate WiFi name, switching your WAVLINK router to AP Mode is the best solution. Access Point (AP) mode helps you convert your WAVLINK router into a simple wireless access point that boosts WiFi coverage across your home or office—without affecting the main router’s settings.

In this guide, you’ll learn what AP mode is, when to use it, and how to set up your WAVLINK router in Access Point mode using a clean and simple method. A related YouTube video tutorial is also included below for easy understanding.

What Is AP (Access Point) Mode in WAVLINK Routers?

AP Mode allows your WAVLINK router to work as a wireless signal extender, but instead of repeating WiFi, it sends internet through a wired connection.
This mode is useful when:

• You want stronger WiFi coverage in specific rooms

• You want seamless roaming using a single WiFi name

• Your main router already handles routing, DHCP, and firewall settings

• You want a more stable alternative to WDS/WiFi repeater mode

Things You Need Before You Start

✔ A WAVLINK router (any AC/AX model that supports AP mode)
✔ An Ethernet cable
✔ Your main router must already have an active internet connection
✔ A phone, laptop, or PC to configure the WAVLINK device

How to Set Up WAVLINK Router in AP Mode – Step-by-Step

Follow the steps below for a successful setup:

Step 1: Connect Your WAVLINK Router to the Main Router

1. Plug in the WAVLINK router and switch it on.

2. Take an Ethernet cable and connect:

• One end to the LAN port of your main router

• The other end to the WAN/LAN port of your WAVLINK router (depends on model; most support AP via LAN port)

This wired connection is essential for AP Mode.

Step 2: Connect to the WAVLINK Router WiFi

From your phone or laptop:

• Go to WiFi settings

• Connect to the default WAVLINK WiFi name (usually “WAVLINK_XXXX”)

• Password is printed on the router label

Step 3: Login to the WAVLINK Setup Page

1. Open a browser

2. Enter the default login URL: http://wifi.wavlink.com

3. Log in with the default username & password (usually admin)

Step 4: Select AP (Access Point) Mode

After logging in:

1. Go to Operation Mode

2. Choose AP Mode / Access Point Mode

3. Save and allow the router to reboot

Step 5: Configure WiFi Settings

Once the router reboots:

• Set a new WiFi name (or use the same name as your main router for seamless roaming)

• Set a strong WiFi password

• Save settings

The WAVLINK router will now work as an Access Point with stable and high-speed WiFi coverage.

Video Tutorial: How to Set Up WAVLINK Router to AP Mode

WAVLINK Router AP Mode Not Working? (Quick Fixes)

If you face issues, try these:

• Make sure the Ethernet cable is properly connected

• Use only the LAN port if AP mode does not activate

• Reset the router and configure again

• Disable DHCP on the WAVLINK device if your model requires manual AP setup

• Ensure your main router’s LAN IP does not conflict with WAVLINK’s IP

Final Words

Setting up your WAVLINK router in AP mode is one of the best ways to extend your WiFi coverage using a stable, wired connection. It provides better performance than repeater mode and ensures seamless connectivity throughout your home or office.

For further help, make sure to check out the YouTube video tutorial added above—it visually explains each step for smoother setup.