Unable to Complete Netgear Nighthawk AC1900 Setup? Read This

In this article, we tried our utmost to give you full details on Netgear Nighthawk Setup. This specific post will come handy to all those folks who are planning to purchase a new Nighthawk AC1900 EX7000 extender for their home network or troubling in their existing Netgear WiFi extender setup.

We hope that after reading this article, all your top queries related to Netgear Nighthawk AC1900 WiFi extender setup and installation will be answered. Ensure to properly follow all the setup steps in the exact given order to install your extender. Let's get the ball rolling.

Special Features of Nighthawk EX7000 AC1900 Extender

In case you are getting troubles with the interrupted network connection or blind spots, then a Netgear Nighthawk mesh extender AC1900 will definitely be your best bet. Essentially, its main function is to improve the signal strength of your current wireless network. What's more, the extender has its own special features such as:


  • Compatible with all routers
  • FastLane Technology can be enabled
  • 700mW high powered amplifiers
  • Dual-band WiFi up to 1900 Mbps
  • Easy setup, even no need of the installation CD
  • Works with 802.11 a/b/g/n/ac WiFi router or gateway
  • Best for online gaming and HD video streaming

Setup Netgear Extender : Nighthawk AC1900 EX7000 Installation

There are two main methods to set up and install your Nighthawk mesh extender: Manual and WPS method. Let's discuss them in brief:

Manual Method

  1. The Netgear EX7000 Nighthawk Repeater WiFi Mesh AC1900 comes with external antennas. So attach them first.

  2. Remove the caps from antennas. After that, adjoin the antennas to connectors and turn them clockwise to tighten.

  3. Now, place the extender closer to your WiFi router. Plug it into a power socket and turn it on.

  4. Make a connection between your computer and extender using either an Ethernet cable or a WiFi connection.

  5. Followed by it, open a web browser of your choice and head over to mywifiext.net web address.

  6. When the login window appears, enter the username and password in the given fields.

  7. Once done, you will be accompanied by the installation assistant.

  8. It will provide you with a step-by-step guide to set up your extender.

  9. Do follow them carefully and complete your extender setup.

Now, unplug the extender and shift it to a new location in the home wherever you like. Join the extender's WiFi network on all your wired and wireless devices and take benefit from the flawless internet connectivity.

WPS Method

Found the manual method a bit tricky? Fret not! We have another way to set up your Nighthawk AC1900 EX7000 extender i.e. WPS method. Known as WiFi Protected Setup, this method is the easiest one and doesn't require you to enter any password for making a connection with the network. Here are the do-follow instructions:

  1. The first step remains the same as that of the manual method. After removing the antenna caps, affix the antennas to connectors and tighten them by rotating clockwise.

  2. Confirm that the antennas are tightened in the right way.

  3. Once done, place the extender and the existing WiFi router in the same room.

  4. Turn the extender on by plugging it into a wall outlet to get started with the Netgear Nighthawk AC1900 EX7000 WiFi extender setup.

  5. Now, press the WPS button on your extender.

  6. A green LED light on the extender will show that there is a good connection between your extender and router.

  7. If your router has dual-functionality, repeat the above-mentioned steps for 5 GHz band.

When there is a reliable connection between your extender and WiFi router, move your extender to any area in your home. That's how you can perform Netgear Nighthawk AC1900 setup without a hitch.

Facebook Comments APPID


Powered by Blogger.