Netgear Extender Flashing Red? Try These Troubleshooting Tips!


Is your Netgear WiFi extender blinking red? Tried everything but nothing resolves the issue? Nothing to worry about! We have got you covered. This troubleshooting guide will make you aware of different ways to get shot of the Netgear extender red light issue. Why waiting? Let’s get started.

Quick Fixes for Netgear Extender Flashing Red Issue

Update the Firmware of Your Extender

In order to the fix the Netgear extender flashing red issue, get started with the firmware update process. An obsolete firmware can push you into a battle with issues like mywifiext not working, Netgear extender red light, WiFi connectivity issues, and a lot more. So, it is important to update the firmware of your Netgear extender on a regular basis.

In the event that you are not familiar with the process on how to update Netgear extender’s firmware, below-given are the steps to follow:

  • Power on your Netgear extender, computer, and router.
  • Access the web interface of your extender via a web browser.
  • Log in to your Netgear WiFi range extender.
  • After you logged in, click on the Firmware Update button.
  • Hit the Update button if there is any new firmware version available for your extender.

After updating the firmware of your Netgear WiFi extender, check whether the red light is still flashing.

Relocate Your Netgear Extender 

Where is your Netgear wireless extender placed? In case you have placed it in corners or near concrete walls, relocate it immediately. The reason being, keeping the extender near such areas can create interference in the path of its WiFi signals, thus raising many issues like a blinking red light.

Other than that, devices such as treadmills, washing machines, Bluetooth speakers, cordless phones, baby monitors, and refrigerators can also block your extender’s WiFi signals. So, keep your device away from such objects.

Say No to Metal Objects and Reflexive Surfaces

Metal objects e.g. metal doors and aluminum studs as well as reflexive surfaces like glass cupboards and mirrors also the culprit behind creating interference in your WiFi signals. So, it is high time that you say no to such devices if you want to avoid issues like a flashing red LED and slow Netgear_ext network issues.

Check the Cable Connections

Another reason why you get stuck with the Netgear extender red light issue is loose cable connections. In order to make your Netgear wireless range extender work properly, there is a need to connect it to the existing router. And for this purpose, it is highly recommended to use only an Ethernet cable.

What’s more, the cable connection you made should be proper and finger-tight. And bring a non-damage Ethernet cable into play. It is suggested that do not connect your devices in a wireless manner to avert further technical glitches.

Factory Reset Your Extender

Is the Netgear extender red light still bothering you? Looks like the issue is much bigger than you are thinking. But don’t you worry! We have one more targeted solution to help you out. And that is, factory reset!

A Word of Caution: Performing the factory reset process will delete all customized settings of your extender. In simple words, you need to configure your Netgear range extender again after resetting because it will restore all its factory default values.

You can reset your Netgear WiFi range extender to the default factory settings by following the instructions highlighted below:

  • Find the Reset button on your extender.
  • Once located, press it using an oil pin.
  • Now, your Netgear extender will automatically reboot.

On the off chance if the above-said reset method doesn’t suit you, here is another method to restore all the default settings on your Netgear wireless extender:

  • Log in to your extender’s web configuration panel using 192.168.1.250 IP.
  • Navigate to the Backup Settings > Erase section.
  • Hit the Restore Device to Factory Default Settings option.

Wait for some time until your Netgear extender resets. 

So, these were our ways to help you fix the Netgear extender flashing red light issue. For more helpful posts, stay tuned with us!

Powered by Blogger.