Netgear WiFi range extender is the ultimate option to amplify the existing wireless range to reach every corner of your home. That's why most users opt for the Netgear extender setup. After the setup, they tend to configure its settings via the default mywifiext web address. However, a lot of users out there complain that they can't access Netgear WiFi extender via mywifiext.net.
If you are also struggling with the same issue, this troubleshooting guide will prove beneficial for you. Let's take the plunge.
Fixed: Can't Access Netgear WiFi Extender Via Mywifiext
1. A Basic Power-Cycling Can Help You a Lot
Turn off the power switch and unplug your Netgear extender from the wall socket. Thereafter, wait for some time. Now, turn on the extender by plugging it into an electrical outlet and switch it on.
2. Avoid Common Mistakes
Wondering what are the common mistakes you are committing? Well, a lot of users rarely look around for the reason why they can't access Netgear WiFi extender. Here, common mistakes are the extender is powered off, disabled internet connection, incorrect web address, and power supply is improper, among others. Therefore, don't make such mistakes while accessing the Netgear extender via mywifiext.
3. Check Cable Connections
Always remember to check cable connections linked with your extender. Never use a damaged cable to make a cable connection because it will cause technical issues as well as harm you. Furthermore, make every cable connection accurate and finger-tight.
4. Check the Web Browser You Are Using
Perhaps, the web browser you use is overloaded with junk files. So, keep in mind to delete cache, cookies, and browsing history from your web browser before you use it. What's more, check the version of your browser as well. In the event that the web browser is obsolete, update it immediately.
5. Go for a Little Technical Troubleshooting With Subnet Mask
At times, the Netgear wireless range extender resets via repeated resetting and starts all over the beginning. And users can't get to mywifiext.net configuration menus unless their extender connects to the router. As soon as the connection has been established, the DHCP subnet of your router immediately takes hold. This, in turn, causes the extender's connection to drop or intermittent. That's why users are unable to access further settings of their Netgear range extender.
In such a case, take an Ethernet cable and use it to connect your Netgear WiFi extender and computer. Make sure that your computer doesn't have another LAN/internet path. So, there will be no access to your router. Then, the extender will use your computer's DHCP to set the subnet mask. Once done, open a web browser and try accessing mywifiext.net for your Netgear extender.
6. Use the Extender's Default IP
On the off chance if the default mywifiext web address doesn't work for you, opt for the default IP. Most of the Netgear wireless extenders use 192.168.1.250 as the default IP. So, try accessing your Netgear extender by entering the default IP as the URL in the web browser. This will surely take you to the Netgear extender's dashboard. You can now make setting changes as per your preferences.