Do you really want fast and uninterrupted connection to access in every nook and cranny of your house? If yes, then performing Rockspace WiFi range extender setup via Rockspace extender login details would be the ultimate choice. However, many perfect devices can cause major issues sometimes. And, your Rockspace WiFi extender is not an exception. It might give issues! One of the most reported issues is that users are continuously seeing flashing red light on it.
If you are also experiencing the same issue, then drop all your worries because this piece of writing is now here to assist you. All you have to do is to follow the troubleshooting hacks outlined here and fix the “Rockspace extender flashing red” issue in a jiffy. Let’s get the ball rolling!
Fixed: Rockspace Extender Flashing Red
Fix 1: Verify the Connection
The red light issue with your Rockspace WiFi range extender may persist if you have not made a proper connection. Yes, you read it right! Perhaps you have not connected your Rockspace extender and router correctly which is forcing the red light to flash on it.
To rectify your mistake, check the Ethernet cable connecting your Rockspace extender and router. Make sure it doesn’t have cuts or damages and inserted in the correct ports of the devices firmly.
But, if you have connected them wirelessly, then regarding this, we would tell you that:
- You must have a stable internet connection
- And, the distance between them is fair enough
Note: Here by “them” and “devices” we are referring to Rockspace WiFi extender and your host router.
Fix 2: Perform Rockspace Extender Firmware
Your Rockspace WiFi range extender could also flash red if the firmware on it is not up-to-date. Hence, to make the most out of your Rockspace extender, you must update its firmware on a regular basis.
Fix 3: Power Cycle Rockspace Extender
Are you still getting the “Rockspace extender red light” issue? If yes, then it can be due to technical glitches. For fixing it, we suggest you power cycle (reboot or restart) your Rockspace extender. Thinking about how to power cycle the device? Without thinking much, follow the instructions outlined underneath:
- First things first, power off your Rockspace extender and unplug it.
- Also, you have to disconnect your devices for the time being.
- Relax for some time!
- Plug in your Rockspace extender back and reconnect it to your host router.
As soon as you plug in your Rockspace extender and connect it with your router, you will not see the flashing red light on the device anymore. And, if the issue persists, then it can be due to improper power supply. All you have to do is to:
- Check the Rockspace extender’s wall socket. Make sure it is in working condition and free of damages.
- Verify the power supply provided to your Rockspace extender via its respective wall outlet. Ensure that the supply to the extender is steady and fluctuation-free. The word fluctuation-free means that there should not be ups-and downs in the power. To prevent this, you can opt for installing a UPS!
The Final Thoughts
Our article on how to fix “Rockspace WiFi extender flashing red light” issue ends here. Anticipating that you have implemented all the hacks listed above! If so, then trust us and mark our words, you will surely be able to solve the issue from the comfort of your home. In case the issue come back again in future, you can give the same fixes a try. So, just save this page on your desktop so that, whenever you need immediate assistance for fixing the red light issue with your Rockspace extender, you have the solutions handy. And, these fixes are applicable on all Rockspace extender model!
