Are you confused why you’re facing Netgear N300 extender connection issues? Don’t be! The list of reasons why such kind of issues bother you are quite long. So, rather than banging your head against a wall, let’s straight away get into the fixes to troubleshoot the issue. By the time, you’re done applying the fixes mentioned in this post, whatever connectivity issues you are facing with your N300 extender will go away. So, fasten your seat belt and get, set, go!
Fixed: Netgear N300 Extender Connection Issues
Power Cycle the Netgear N300 Extender
Whatever the reason why you are facing Netgear N300 extender connection issue, power cycling the device is one of the easiest ways to deal with the issue. Mentioned below are some useful instructions that you need to follow and apply in order to restart your N300 extender:- Disconnect all the devices connected to N300.
- Power off your Netgear N300 extender.
- Count to 60. In simple words, wait patiently.
- Plug your Netgear extender back in.
Note: If you are using a Windows or Android device, use www.mywifiext.net.
Opt for Another Connection Mode
Have you connected your Netgear N300 extender and router using a wireless source? If yes, then you found another reason why you are facing connection issues with your Netgear N300 extender. But, don’t sweat over it! Switching to another connection mode can be of great help.Instead of connecting your Netgear extender and router wirelessly, it is advised to connect them using an Ethernet source. After connecting your Netgear extender and router using an Ethernet source, check the connection by accessing Netgear N300 setup page. Bear in mind that using an Ethernet cable to connect your devices is much more safe and reliable.
The Wall Socket Should Be Working
Another reason why you are facing Netgear N300 extender connection issues might be the wall socket in use isn’t well-working. To cope up with the issue, check whether the wall socket that you have used to plug in your Netgear extender is well-working.Also, the wall socket in which your Netgear N300 extender is plugged in must be in the reach of your existing router.
Update the Firmware of Your Netgear Extender
Updating the firmware of your Netgear N300 WiFi extender is another way through which you can easily get rid of the annoying connection issues. Follow the points highlighted below and know how to update the firmware of your Netgear N300 extender:- Power on your Netgear extender and connect it to your router.
- Let the LEDs on your device become green and stable.
- Then, turn on a PC or laptop.
- Launch a web browser of your choice.
- Enter www.mywifiext.net web address or 192.168.1.250 IP in the browser’s address bar. For Apple, iPad or iOS devices, use mywifiext.local web address.
- Press Enter.
- Fill in the extender login credentials and follow the on-screen instructions.
Perform a Factory Reset on Your Netgear Extender
Although updating Netgear extender’s firmware would have helped you in getting rid of the issue, in case it didn’t, then it’s high time that you reset your N300. Wondering how to reset Netgear extender? Simply walk through the steps outlined underneath and know how to execute the process:- First of all, disconnect your Netgear extender from router.
- Then, locate the reset hole on your N300.
- When found, press it gently for a few seconds using any pointed and thin object.
- Release the Netgear extender’s factory reset hole.
- Wait patiently for the changes to get saved.
- Now, perform the Netgear extender setup process again by logging in to your N300 and following the on-screen instructions.
