Linksys Router Setup and Troubleshooting: A Complete Guide

 

Do you want to get rid of slow internet connection? If yes, then performing Linksys router setup would be an ultimate option. Setting up Linksys router will not just provide you an uninterrupted internet connection but also boost the performance of your existing WiFi network. Apart from that, you can connect as many devices as you want to your router’s WiFi network.


Want to know howto set up a Linksys router? If you nod in yes, follow the step-by-step guidelines highlighted below:


Given-below are the instructions that you need to follow to set up Linksys router without any hassle. Keep scrolling down!



Step 1: First and foremost, place your Linksys router in the same room where your existing modem is. Then, attach the antennas to your Linksys router (if any).


Step 2: Plug the power adapter of your Linksys router into a working wall outlet.


Step 3: Wait for some time. Let the power LED on your Linksys router become stable.


Step 4: Next, grab an Ethernet cable and connect your Linksys router to the modem. You can also make a wireless connection between your Linksys router and modem.


Step 5: Then, turn on your PC or laptop and connect it to your existing WiFi network.


Step 6: Hover your mouse cursor over the browser’s address bar and enter the default Linksys router IP address.


Step 7: Press the Enter key.


Step 8: Linksys router login page will display.


Step 9: Enter the router’s username and password into the given fields and click on the Log In button.


Step 10: Follow the on-screen instructions and set up Linksys router with great ease.


Can’t Set up Linksys Router? Try This Out!


Step 1: Ensure that your Linksys router and the modem are receiving continuous power supply.


Step 2: Be careful while entering the default Linksys router login details.

Make sure that the Ethernet cable you have used to connect your Linksys router and modem isn’t worn out.


Step 3: Update the firmware of your Linksys router. For this, visit the web-based setup page of your Linksys router and follow the on-screen instructions.


Step 4: In case of internet-related issues, power cycle your Linksys router once. For this, unplug your Linksys router from the power socket, wait for 2 minutes, and plug it back in again.


Step 5: Make sure to follow the instructions in exact given order to setup Linksys router.


Step 6: Adjust the antennas of your Linksys router in straight-vertical position.


Step 7: The web browser you are using to access the Linksys router login page must not be outdated.


Step 8: Switch to a different web browser. Before that, don’t forget to clear all the browsing history and junk files, and close unwanted tabs from your internet browser.


Still facing Linksys router setup issues? Fret not! Reset your Linksys router back to the factory default values. However, keep in mind that a factory reset erases all the personalized information and data of your Linksys router, including username, password, and security settings. So, what you are supposed to do? Well, keeping the backup of all the customized settings of your Linksys router would be the ultimate solution.


To reset your Linksys router, follow the instructions given-below:


Step 1: Disconnect your Linksys router from your modem, PC, and laptop.


Step 2: Keep your Linksys router plugged in. The continuous and uninterrupted power supply is very important to reset Linksys router in a hassle-free way.


Step 3: Once you’re done, locate and press the Linksys router reset button with the help of a pin or a paper clip.


Step 4: Hold it for some time and release.


Step 5: Your Linksys router resets successfully. Now, you can configure it again using the default settings, username and password.


Still have queries on how to set up a Linksys router? Ask our technicians now via comments.

Powered by Blogger.